High Yield Strength Steel Quend® for Lifting
Looking for steel enabling you to keep developing the highest booms along with decreasing the thickness but without compromising on reliability? You’ve found it: Quend®. The High Yield Strength Steel developed by NLMK Europe offers indeed superior properties in terms of tensile strength, thickness tolerances and flatness. This combination of factors helps you to reach your highest ambitions.
780-1500 MPa
tensile strength
The Quend® plates are produced with the best attention, from degassed slabs made in Lipetsk and the four-stand finishing mill to the high precision quenching & tempering and the accurate levelling. This mastered process cares also for the consistent quality. So when you order Quend®, you are sure of getting premium plates. With a bonus: its high workability!
The top class properties in terms of thickness tolerances, flatness and surface finish characterizing Quend® are the key for the increased performances in cutting, bending or welding. Where accuracy is needed to manufacture booms, Quend®’s high workability becomes an asset to get optimal processing results in the workshop.
In a nutshell, Quend® accompanies you to boost your performance in lifting equipment.
PRODUCTS
QUARD®
QUARD®
Quard® plates are produced at NLMK Clabecq, where they are treated in a state-of-the-art Quenching and Tempering unit. The slabs used are supplied by the NLMK’s Lipetsk production site. Quard® abrasion resistant plates are delivered with hardness of 400 HB (Quard® 400), 450 HB (Quard® 450), 500 HB (Quard® 500) and 550 HB (Quard® 550), with thicknesses ranging from 3.2 mm to 64 mm and widths from 1,500 to 3,100 mm.
QUEND®
QUEND®
Quend® is produced at NLMK Clabecq in Belgium, where it is rolled and then quenched and tempered in a recent and modern heat treatment unit. The production is made from slabs coming from the NLMK’s Lipetsk production site. The Quend® high yield strength steel plates are delivered with a yield strength of 700 MPa (Quend® 700), 900 MPa (Quend® 900), 960 MPa (Quend® 960) and 1100 MPa (Quend® 1100) with thicknesses ranging from 4 mm to 64 mm and widths from 1,500 to 3,100 mm.
They are designed for lifting and hoisting equipment, truck chassis, handling equipment, trailers, and other applications where high structural strength is of critical importance.
They are designed for lifting and hoisting equipment, truck chassis, handling equipment, trailers, and other applications where high structural strength is of critical importance.
.jpg)
